How to read the results
- Draw: the line should follow your finger without gaps or jumps. A broken line always in the same place points to a dead zone.
- Grid: slide one finger over every square. Squares that stay grey (amber after «Show missed squares») did not register a touch.
- Ghost touches: leave the phone on a table without touching it. Any touch counted means the screen is detecting touches by itself.
- Fingers at once: most phones detect 5 to 10. If you only get 1 or 2, the browser may limit it; try another browser before blaming the screen.
Common causes of touch problems
A thick or cracked screen protector, a dirty or wet screen, a charger without ground (touches go crazy while charging) and replacement screens of poor quality. A dead strip that appeared after a fall is usually damage to the panel or its connector.
Frequently asked questions
Does it work on iPhone?
Yes. On iPhone, real full screen is not available in Safari, so the test uses the whole visible area; turn the phone sideways to reach the corners.
The screen responds only when charging, or goes crazy when charging
That usually comes from a charger or cable without proper grounding. Test again with the original charger or unplugged.
Can a touch problem be fixed with a setting?
Sometimes: remove the screen protector, clean the screen, and on Android turn on «Touch sensitivity» (for gloves or protectors) if your phone has it. A dead zone that stays after that is a hardware fault.